Would it be a bad idea to remove the black damper, place a syringe over the tube that supplies the ink to the head, suck out some ink, then maybe use the syringe to lightly force some Windex into the head (allowing the Windex to dissolve the ink from the inside)? What else can be done to free up this stuck head? Restarted the printer and it went through its charging, etc.ĭid another nozzle check and still no change. Made a non-linting pad, put Windex on it and placed pad under the damper/head assembly, for a while (about 20 minutes). Put some Windex on the head parking pad and waited a day to see if this would loosen things up. Waited a day to see if system stabilized. Put in a new damper, filled the damper with ink, did cleaning to get head charged, waited a bit and did nozzle check. I ran a nozzle check and the black ink nozzles had quite a few missing segments.ĭid a cleaning operation, waited a bit, did another nozzle check and still maybe one less segment missing.ĭid all this again and no changes to the results.
0 Comments
Leave a Reply. |